Description

Buy Kluberpaste 46 MR 401 High-pressure lubricating paste 600g tinDubai Uae

Benefits for your application

Easy assembly and disassembly of highly loaded frictional connections
Prevents premature material ageing caused by tribo-corrosion and stick slip
Can be used with many material combinations, including plastics and elastomers

Application:

Kluberpaste 46 MR 401 is especially suitable as an assembly lubricant in frictional connections and for thin-film lubrication of all friction points subject to very high pressure loads, low sliding speed, high wear, Stick-Slip and tribo-corrosion.
Typical applications include: press fit assembly of pins and bolts, mounting of rolling bearings, wheels and flanges, lubrication of rolling and plain bearings operating at very low speeds.
Kluberpaste 46 MR 401 is also suitable to prevent running-in damage and stick-slip in components such as threaded spindles, spline shafts, ball and socket joints and rod end bearings.

Application notes

Before applying Kluberpaste 46 MR 401 it is important to clean the contact surfaces and remove any solvent residues with a lint-free, dry cloth.
Kluberpaste 46 MR 401 can be easily applied to the entire surface in a thin layer with a spatula. It is important to avoid overlubrication. Before applying the paste to a plastic material we recommend undertaking a materials compatibility test

Application notes:

Clean and degrease the surfaces thoroughly. Then apply the paste in a thin, coherent layer by means of a brush or cloth that does not fray (do not rub in). ALTEMP Q NB 50-Spray can be used to facilitate application.

Technical specifications

Article number	005108
Lower service temperature	-40 °C / -40 °F
Upper service temperature	150 °C / 302 °F
Colour space	white
Density at 20 °C	approx. 1.23 g/cm³
Worked penetration, DIN ISO 2137, 25 °C, lower limit value	300 x 0.1 mm
Worked penetration, DIN ISO 2137, 25 °C, upper limit value	340 x 0.1 mm
Flow pressure of lubricating greases, DIN 51805-2, test temperature: -40 °C	<= 1 600 mbar
Drop point, DIN ISO 2176, IP 396	>= 185 °C
Four-ball tester, welding load, DIN 51350 pt. 04	>= 4 600 N

Buy Kluberpaste 46 MR 401 High-pressure lubricating paste 600g tin in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, UAE at best Prices from Maisam Trading LLC. Ready Stock Available.

Check out our range of Kluber In Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, Saudi Arabia, Qatar, Oman, Bahrain by clicking here

Bundles

Sleep Easy Gummines

Capsules for Skin

Kluberpaste 46 MR 401 High-pressure lubricating paste 600g tin

Send Inquiry