Araldite 2011
Araldite 2011 is a multipurpose, two component, room temperature curing, paste adhesive of high strength and toughness. Araldite 2011 Epoxy is suitable for bonding a wide range of materials in common use. The 2011 Epoxy is a versatile adhesive for the craftsman as well most industrial applications.
Features:
- High shear and peel strength
- Tough and resiliant
- Good resistance to dynamic loading
- Bonds a wide variety of materials in common use
- Various sizes available
Description
Araldite 2011 is a multipurpose, high strength, viscous, epoxy adhesive. This versatile paste has the capabilities to bond a wide variety of materials including metals, ceramics, plastics, glass, rubber and most other materials. It has good resistance to dynamic loading and it provides a long working life. Once thoroughly mixed together, it leaves a pale yellow colored paste adhesive.
Product Benefits
- Bonds multiple metals and plastics
- Long pot life
- Self-levelling
- Resistant to dynamic loads
Application Areas
- Assembly of airplane galleys
- Encapsulation of electronic components
- Bonding of various woods in marine applications
- Assembly of jewelry
- Bonding of motor magnets
Documents
Araldite 2011 epoxy is a two part, multipurpose, electrically insulating, structural epoxy adhesive. This advanced material cures at temperatures from 20 to 180 degrees Celsius with no release of unstable components. It has a variety of capabilities being versatile for the craftsman as well for most industrial applications. The shear and peel strengths of this compound is high with excellent resistance to static.
The strength and the durability of this engineered product are dependent on what is being bonded and how well the surface has been prepared. All grease, dirt and oil need to be removed before applying this epoxy material. It can be applied manually using a spatula or robotically to dry pretreated joints. All tools should be washed with hot water and soap before the adhesive has time to set. For the greatest lap shear strength, it is recommended to have a layer of adhesive .05 to .10 mm thick. As soon as the Araldite 2011 is applied, the joints should be immediately assembled and clamped allowing the proper cure.