Momentive SilCool TIA216G is a premium 2-part thermally conductive silicone rubber potting compound by Momentive Performance Materials, available in UAE, Dubai, and across the GCC from Maisam Trading LLC. As a trusted thermally conductive potting material Dubai and GCC electronics manufacturers rely on, TIA216G has been specifically developed for use on complex thermal interface designs where conventional gap fillers or thermal pads cannot conform to intricate geometries. Its notably low viscosity allows it to flow into and fill complex 3-dimensional shapes and cavities, enabling reliable reduction of contact interference between components and heat dissipation surfaces. Momentive SilCool TIA216G

This 2-part silicone potting compound cures rapidly to a soft grey rubber and gel consistency with a Shore E hardness of 40 upon exposure to heat — 30 minutes at 70°C for fast production processing — or it can cure at room temperature over 6 hours when elevated temperature cure is not available. The cured material retains a tacky adhesion on its surface, which further enhances thermal contact with adjacent components. With a thermal conductivity of 1.6 W/mK, a dielectric strength of 20 kV/mm, and a volume resistivity of 4.0×10⁶ MΩm, TIA216G provides both effective thermal management and strong electrical insulation properties. It is non-corrosive to metals and fully UL94V-0 compliant under file number E56745 — a critical requirement for electronics assemblies in industrial and commercial environments. Momentive SilCool TIA216G

As a reliable low viscosity thermal silicone supplier in Dubai and across the GCC, Maisam Trading LLC provides the Momentive TIA216G 4.4lb kit with full technical support. Customers looking to buy TIA216G in UAE, or source a high-performance thermal management potting compound in Saudi Arabia, Qatar, Oman, Kuwait, or Bahrain, will find Maisam Trading LLC the most technically competent and well-stocked supplier in the region. Note: substrate compatibility testing is recommended prior to full series application, as certain surface contaminants including sulfur, nitrogen compounds, and organic metallic salts can inhibit cure. Momentive SilCool TIA216G

Features & Benefits

• Good thermal conductivity — 1.6 W/mK
• Low viscosity — conforms to complex shapes and intricate interface geometries
• Fast cure with exposure to heat — 30 minutes at 70°C
• Room temperature cure capability — 6 hours at 23°C
• Easy to use — 1:1 mix ratio by weight and volume
• Repairability — can be reworked after curing
• Non-corrosive to metals
• UL94V-0 compliant — file number E56745
• Retains tacky surface adhesion after curing for improved thermal contact

Application

• Potting and encapsulation of complex thermal interface designs in electronics
• Thermal management of intricate 3-dimensional component assemblies
• Filling irregular cavities and gaps between heat-generating components and heat sinks
• Encapsulation of power electronics, sensors, and LED modules
• Thermal interface in consumer electronics, automotive electronics, and telecommunications equipment

Industries Served

• Consumer Electronics Manufacturing
• Telecommunications & Data Communications
• Automotive Electronics
• Power Electronics & LED Lighting
• Industrial Electronics & Control Systems

Why Buy from MAISAM TRADING LLC?

• 18+ years of experience supplying industrial chemicals and Momentive products across the GCC
• Dedicated B2B support and technical guidance
• Prompt delivery and export solutions across UAE, Saudi Arabia, Qatar, Oman, Kuwait & Bahrain
• Verified stock of original Momentive products
• Call: +971521672252 | Email: sales@maisamdubai.com

Technical Specifications

FAQs

Q1: What is Momentive SilCool TIA216G used for? TIA216G is a 2-part thermally conductive silicone rubber potting compound specifically designed for complex thermal interface designs in electronics. Its low viscosity allows it to conform to intricate shapes, reducing contact interference and improving heat dissipation.

Q2: What is the thermal conductivity of TIA216G? TIA216G delivers a thermal conductivity of 1.6 W/mK after curing, with a high dielectric strength of 20 kV/mm, making it suitable for both thermal management and electrical insulation applications.

Q3: What is the mix ratio and cure schedule? TIA216G is mixed in a 1:1 ratio by weight and volume. It cures in 30 minutes at 70°C, or in 6 hours at room temperature (23°C). Work life at 23°C is 2 hours.

Q4: Is TIA216G repairable after curing? Yes. TIA216G is designed for repairability, making it possible to rework assemblies after cure without damage to surrounding components.

Q5: Is TIA216G non-corrosive to metals? Yes. TIA216G is non-corrosive to metals, making it safe for use in direct contact with metal housings, heat sinks, and electronic component contacts.

Q6: Is TIA216G UL94V-0 compliant? Yes. TIA216G is UL94V-0 compliant under file number E56745, meeting flame retardancy requirements for commercial and industrial electronics assemblies.

Q7: Are there any substrate compatibility considerations? Yes. Substrates containing water, sulfur, nitrogen compounds, organic metallic salts, or phosphorus compounds can inhibit curing. Pre-testing of a sample patch on the actual substrate is recommended prior to full series application.

Q8: Where can I buy Momentive SilCool TIA216G in the UAE or GCC? Maisam Trading LLC is a trusted Momentive supplier in Dubai. Contact +971521672252 or email sales@maisamdubai.com.

Availability & Support

Momentive SilCool TIA216G Thermally Conductive Silicone Rubber 4.4lb is available across Dubai and all major GCC industrial supply networks through Maisam Trading LLC.

• Call / WhatsApp: +971521672252
• Email: sales@maisamdubai.com for quotes, TDS, SDS, or technical application guidance