HomeMaisam ShopAll Product'sKlüber ISOFLEX LDS 18 Special A/UV Long-term lubricating grease 1kg
Klüber isoflex lds 18 special a/uv long-term lubricating grease 1kg

Klüber ISOFLEX LDS 18 Special A/UV Long-term lubricating grease 1kg

Dynamically light long-term lubricating grease

  • ISOFLEX LDS 18 SPECIAL A/UV is a dynamically light longterm grease for rolling and plain bearings. It is based on mineral oil, ester oil and a lithium soap. Crucial performance
    characteristics are ageing and oxidation resistance, corrosion protection and good resistance to water. ISOFLEX LDS 18 SPECIAL A/UV contains a UV indicator for reliable lubricant film
    detection in the event of minimum quantity lubrication
Category: Tags: , , , , , , , , , , , , , , , , , , , , , Brand:

Description

Buy Klüber ISOFLEX LDS 18 Special A/UV Long-term lubricating grease 1kg Dubai Uae

Benefits for your application

  • Long service life due to good corrosion protection and resistance to ageing and oxidation enabling cost savings
  • Tried and tested over many years, especially at high speeds and low temperatures
  • Low internal friction of the lubricant for low internally generated heat in the bearing and increased service life

Application

  • Tried and tested for rolling and plain bearings running under low temperatures and/or high speeds. For many years, ISOFLEX LDS 18 SPECIAL A/UV has been used in starter motors and seat belt retractors in cars

 

Technical specifications

Article number 4176
Chemical composition UV additive
Chemical composition, thickener lithium soap
Chemical composition, type of oil ester oil
Chemical composition, type of oil mineral oil
Upper service temperature approx. 120 °C / 248 °F
Lower service temperature approx. -50 °C / -58 °F
Colour space yellow
Texture homogeneous
Texture short-fibred
Density at 20 °C approx. 0.88 g/cm³
NLGI grade, DIN 51818 2
Worked penetration, DIN ISO 2137, 25 °C, upper limit value 295 x 0,1 mm
Worked penetration, DIN ISO 2137, 25 °C, lower limit value 265 x 0,1 mm
Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C approx. 15 mm²/s
Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C approx. 3,5 mm²/s
Minimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened original container, approx. 36 months

 

Buy Klüber ISOFLEX LDS 18 Special A/UV Long-term lubricating grease 1kg  in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, UAE  at best Prices from Maisam Trading LLC. Ready Stock Available.

Check out our range of Klüber In Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, Saudi Arabia, Qatar, Oman, Bahrain by clicking here

 

Buy Klüber 

Downloads

Product information-ISOFLEX LDS 18 SPECIAL A UV

 

 

 

Related products

X