HomeMaisam ShopAdhesive & LubricantsKluber ISOFLEX NCA 15 Spindle bearing grease 1kg can

Kluber ISOFLEX NCA 15 Spindle bearing grease 1kg can

Spindle bearing grease

  • ISOFLEX NCA 15 is a dynamically light grease with good pressure absorption properties for plain and spindle bearings. It consists of ester oil, synthetic hydrocarbon oil, mineral oil and
    special calcium soap. The product is resistant to water and protects reliably against wear
  • Content: 1kg can
  • Available in 50g tube, 400g cartridge, 1kg can , 25kg bucket

et

Description

Buy Kluber ISOFLEX NCA 15 Spindle bearing grease 1kg can  Dubai UAE

 

 

Benefits for your application

  • Longer rolling bearing life due to good wear protection, water resistance and pressure absorption capacity
  • Tried and tested over many years especially in high-speed and low-temperature applications
  • Low heating-up of bearings due to low lubricant friction leading to longer service life
  • Low running torque enables energy savings, particularly at low temperatures, hence costs savings possible

Application

  • ISOFLEX NCA 15 is particularly suitable for the lubrication of spindle and tapered roller bearings, threaded spindles, ball screws subject to high loads, and for all high-speed bearings, e.g. bearings in OE-spinning turbines used in the textile industry

Technical specifications

Article number 4180
Chemical composition, type of oil mineral oil
Chemical composition, type of oil ester oil
Chemical composition, thickener special calcium soap
Texture short-fibred
Texture homogeneous
Lower service temperature -50 °C / -58 °F
Upper service temperature 120 °C / 248 °F
Colour space beige
Density at 20 °C approx. 0,94 g/cm³
Worked penetration, DIN ISO 2137, 25 °C, lower limit value 265 x 0,1 mm
Worked penetration, DIN ISO 2137, 25 °C, upper limit value 295 x 0,1 mm
Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C approx. 21 mm²/s
Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C approx. 4,5 mm²/s
Speed factor (n x dm) approx. 1 300 000 mm/min
Shear viscosity at 25°C, shear rate 300 s-1, equipment:rotational viscometer, upper limit value 8 000 mPas
Shear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value 3 500 mPas
Corrosion inhibiting properties of lubricating greases, DIN 51802, (SKF-EMCOR), test duration: 1 week, distilled water <= 1 corrosion degree
Low-temperature torque, IP 186, -50 °C, start <= 1 000 mNm
Low-temperature torque, IP 186, -50 °C, running <= 120 mNm
Drop point, DIN ISO 2176 >= 180 °C
Minimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened original container, approx. 36 months

 

Buy  Kluber ISOFLEX NCA 15 Spindle bearing grease 1kg canin Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, UAE  at best Prices from Maisam Trading LLC. Ready Stock Available.

Check out our range of Kluber In Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, Saudi Arabia, Qatar, Oman, Bahrain by clicking here

 

Buy Kluber

Downloads

Product information – ISOFLEX NCA 15

X