HomeMaisam ShopAdhesive & LubricantsKlüber ISOFLEX TEL/3000 ALTEMP Sliding grease 25kg bucket

Klüber ISOFLEX TEL/3000 ALTEMP Sliding grease 25kg bucket

ISOFLEX TEL/3000 ALTEMP Sliding grease with emergency lubricating properties | N° 005060

  • Operators of precision-engineering and textile industry applications often have different requirements than in other industries.
  • Precision engineering often requires greases with low friction coefficients and starting torques that provide emergency lubrication. Good low-temperature characteristics are also a frequent requirement.
  • Temperature range: -45°C to +60°C
  • Volume:  25kg

Description

Buy Klüber ISOFLEX TEL/3000 ALTEMP Sliding grease 25kg bucket Dubai Uae

Benefits for your application

  • Synthetic product for low friction and starting torque
  • Longer component lifetime with optimised wear protection
  • Good corrosion protection preventing premature component failure
  • Low internal friction of the lubricant for low internally generated heat in the bearing and increased service life

Applications

  • The special product properties of ISOFLEX TEL 3000 ALTEMP facilitate its use in precision engineering and the textile industry.
  • Typical applications of ISOFLEX TEL 3000 ALTEMP include:
    • Rolling and plain bearings used in precision engineering at normal and low temperatures
    • Zig-zag winding guides in spool and twisting machines
    • Yarn guide rails in spool and twisting machines

Application notes

  • ISOFLEX TEL 3000 ALTEMP can be applied to the clean lubrication point by brush, spatula or similar application equipment. The friction point can be cleaned with commercially available cleaning agents if necessary.

Technical specifications

 Lower service temperature  -45 °C / -49 °F
 Upper service temperature  60 °C / 140 °F
 Texture  homogeneous
 Texture  short-fibred
 Colour space  beige
 Density at 20 °C  approx. 0.95 g/cm³
 Worked penetration, DIN ISO 2137, 25 °C, lower limit value  280 x 0.1 mm
 Worked penetration, DIN ISO 2137, 25 °C, upper limit value  310 x 0.1 mm
 Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C  approx. 19 mm²/s
 Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C  approx. 4.5 mm²/s

 

 

Buy  Klüber ISOFLEX TEL/3000 ALTEMP Sliding grease 25kg bucket  in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, UAE  at best Prices from Maisam Trading LLC. Ready Stock Available.

Check out our range of Klüber In Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, Saudi Arabia, Qatar, Oman, Bahrain by clicking here

 

Buy Klüber 

Downloads

Product information – ISOFLEX TEL 3000 ALTEMP

Safety Data Sheet – ISOFLEX TEL/3000 ALTEMP

 

 

X