HomeMaisam ShopAdhesive & LubricantsKluber STABURAGS NBU 8 EP Rolling bearing high-pressure grease 25kg

Kluber STABURAGS NBU 8 EP Rolling bearing high-pressure grease 25kg

Rolling bearing and high-pressure grease

  • STABURAGS NBU 8 EP is a lubricating grease based on mineral oil and barium complex soap. It has been used successfully for many years as a long-term grease for bearings subject to high specific loads. Its good wear protection properties are enhanced by the barium complex thickener.
  • STABURAGS NBU 8 EP protects reliably against corrosion and is resistant to water. It meets the requirements of DIN 51 807, dated May 1970: SKF-R2F test, test run B, 140 °C, and it achieves about 4000 operating hours in the SKF-ROF test at 120 °C.
  • Content: 25kg bucket
  • Available in  400g cartridge, 1kg can, 25kg bucket

Description

Buy Kluber STABURAGS NBU 8 EP Rolling bearing high-pressure grease 25kg Dubai UAE

 

Benefits:

  • Good corrosion protection
  • Good resistance to ambient media
  • Good wear protection / EP properties
  • Protects against tribo-corrosion
  • High-pressure grease

Application:

  • STABURAGS NBU 8 EP has proven efficient as a rolling bearing and high pressure grease protecting against wear.
  • It is used in traction motors, journal bearings, electric motors, pumps, and tapered roller bearings.

Application notes:

  • The product is applied by brush, spatula or conventional metering systems.

Product data:

Article number 017105
 NLGI grade, DIN 51818  2
 NSF-H2 registration  135 684
 Chemical composition, type of oil  mineral oil
 Chemical composition, thickener  barium complex soap
 Lower service temperature  -20 °C / -4 °F
 Upper service temperature  140 °C / 284 °F
 Color space  brown
 Density at 20 °C  approx. 0.99 g/cm³
 Worked penetration, DIN ISO 2137, 25 °C, lower limit value  265 x 0.1 mm
 Worked penetration, DIN ISO 2137, 25 °C, upper limit value  295 x 0.1 mm
 Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C  approx. 97 mm²/s
 Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C  approx. 11.5 mm²/s
 Speed factor (n x dm)  approx. 500 000 mm/min
 Shear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value  5 500 mPas
 Shear viscosity at 25°C, shear rate 300 s-1, equipment:rotational viscometer, upper limit value  9 500 mPas
 Drop point, DIN ISO 2176  >= 220 °C
 Minimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened
original container, approx.
 60 months

 

 

Buy Kluber STABURAGS NBU 8 EP Rolling bearing high-pressure grease 25kg  in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, UAE  at best Prices from Maisam Trading LLC. Ready Stock Available.

Check out our range of Kluber In Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, Saudi Arabia, Qatar, Oman, Bahrain by clicking here

 

Buy Kluber 

Downloads

Product information – STABURAGS NBU 8 EP

X