HomeMaisam ShopAdhesive & LubricantsKlüberplus S 06-100 Assembly gel for elastomer components 1kg tin

Klüberplus S 06-100 Assembly gel for elastomer components 1kg tin

Klüberplus S 06-100 Gel for facilitated assembly of elastomer and plastic components | N° 012102

  • When joining or assembling rubber-elastic materials, it is particularly important that the components can be fitted perfectly without excessive force.
  • Ill-fitting or damaged surfaces are frequently the result of less than optimal assembly lubrication, e.g. by mineral-oil-based products, soap solutions, water or silicones. 
  • Volume: Can 1 kg
  • Also available in: Canister 20 kg, Bucket 25 kg, Drum, 180 kg

Description

Buy Klüberplus S 06-100 Assembly gel for elastomer components 1kg tin  Dubai Uae

Benefits for your application

  • Cost savings due to shorter assembly times and reduction of rejects due to lower assembly forces
  • Environmentally sound and safe to use
    • Lower consumption of chemicals due to excellent temporary lubricating effect
    • Non-flammable, water-based design – without solvent, mineral oil or silicones
    • Prevents workplace injuries due to less force required for assembly
  • Neutral towards many materials, including EPDM, NBR, FKM, VMQ, ACM

Applications

  • The product concept has proven particularly successful in profiled seals, shaft seals, rubber sleeves and O-rings in the automotive industry.
  • Joining and assembly processes with rubber-elastic materials
  • Application examples:
    • O-rings
    • Membranes, bushings
    • Radial shaft seals (RSS) on shafts and in casings
    • Cover caps (e.g. for gear shafts)
    • Profiled seals, e.g. for doors, windows, crankshaft casings
    • Stopper and fixing elements
    • Sealing elements, moulded rubber parts
    • Hoses (e.g. brake fluid, cooling fluid and fuel hoses)

Application notes

  • The Klüberplus S 06 series shows good stability and no tendency to separation even after prolonged storage. Stirring is therefore not required prior to use.
  • The products’ viscosity can be reduced by dilution with water. Once diluted, the product should be used up completely without delay.
  • The Klüberplus S 06-100 series prevents during its application and upon complete evaporation of any water the immediate formation of rust / contact corrosion for a limited period of time.

Technical specifications

 Color space  white
 Density at 20 °C  approx. 1.00 g/cm³
 Kinematic viscosity, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C  approx. 1 400 mm²/ s
 pH-value, DIN ISO 976  approx. 8
 Minimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened
original container, approx.
 24 months

Buy  Klüberplus S 06-100 Assembly gel for elastomer components 1kg tin  in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, UAE  at best Prices from Maisam Trading LLC. Ready Stock Available.

Check out our range of Klüber In Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, Saudi Arabia, Qatar, Oman, Bahrain by clicking here

 

Buy Klüber 

Downloads

Product information – Klüberplus S 06-100, -100 M2, -100 M4

 

X