HomeMaisam ShopAdhesive & LubricantsKlübersynth BHP 72-102 High temperature grease 600g

Klübersynth BHP 72-102 High temperature grease 600g

Klübersynth BHP 72-102 is an innovative, synthetic long-term lubricating grease based on ester oils and perfluorinated polyether oil (PFPE). Its outstanding characteristics are good oil retention at high permanent temperatures and good corrosion
protection as well as water resistance – yet another contribution to a longer bearing life and a higher thermal stability compared to conventional lubricants. In tests performed on component test rigs subject to high permanent temperatures up to 200 °C
Klübersynth BHP 72-102 offers an extremely long service life.


Buy Klübersynth BHP 72-102 High temperature grease 600g Dubai UAE


Benefits for your application

  • Long availability of components over a wide service temperature range:
  • when exposed to corrosive atmosphere
  • when exposed to high vibrations and loads
  • High economic efficiency due to innovative hybrid grease formulation


Klübersynth BHP 72-102 has been designed for the lifetime lubrication of rolling bearings subject to high loads and alternating temperatures ranging from -40 °C to 200 °C. The product is suitable for the lubrication highly loaded rolling bearings in components close to automobile engines, e.g. bearings viscocouplings, belt tensioners, water pumps, fans, servomotors and similar applications. Klübersynth BHP 72-102 forms a stable grease collar that serves as a lubricant reservoir resistant to vibration and at the same time helps to protect the bearings against contaminants.

Application notes

Klübersynth BHP 72-102 can be applied by standard metering systems (brush, spatula, grease gun). Ideally, the bearing should be metallically blank. If any anticorrosive fluid has been applied prior to greasing, we recommend checking compatibility
with the lubricant.

Technical specifications


 Chemical composition, type of oil  PFPE
 Chemical composition, type of oil  ester oil
 Chemical composition, thickener  polyurea
Chemical composition, solid lubricant  PTFE
 Lower service temperature  -40 °C / -40 °F
 Upper service temperature  200 °C / 392 °F
 Colour space  white
 Density at 20 °C  approx. 1.30g/cm³
 Drop point, DIN ISO 2176, IP 396  >= 240 °C
 Worked penetration, DIN ISO 2137, 25 °C, lower limit value  240 x 0.1 mm
 Worked penetration, DIN ISO 2137, 25 °C, upper limit value  270 x 0.1 mm
 Base oil viscosity at 40 °C, calculated value  approx. 130mm²/s
 Base oil viscosity at 100 °C, calculated value  approx. 20 mm²/s
 Speed factor (n x dm)  approx. 1 000 000   mm/min
 Shear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value  4 000 mPas
 Shear viscosity at 25°C, shear rate 300 s-1, equipment:rotational viscometer, upper limit value  8 000 mPas
 Corrosion inhibiting properties of lubricating greases, based on DIN 51802, SKF-EMCOR, test   duration: 1 week, 3 % NaCl solution  <= 3 corrosion degree
 Copper corrosion, DIN 51811, (lubricating grease), 24h/100°C  1 – 100 corrosion   degree
 Flow pressure of lubricating greases, DIN 51805, test temperature: -40 °C  <= 1 400 mbar
 Minimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened
original container, approx.
 36 months


Buy Klübersynth BHP 72-102 High temperature grease 600g in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, UAE  at best Prices from Maisam Trading LLC. Ready Stock Available.

Check out our range of Klüber In Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, Saudi Arabia, Qatar, Oman, Bahrain by clicking here


Buy Klüber 


Product information-Klübersynth BHP 72-102