HomeMaisam ShopAdhesive & LubricantsKlubertemp GR M30 High viscosity long-term grease white 10kg hobbock

Klubertemp GR M30 High viscosity long-term grease white 10kg hobbock

Klubertemp GR M30 Long-term greases based on perfluorinated polyether | N° 090177

  • Klubertemp GR M greases are white, odourless, long-term greases based on perfluorinated polyether (PFPE) oils and polytetrafluoroethylene (PTFE) thickener.
  • The extremely high viscosity index, i.e. the very flat viscosity curve of the base oils, allows excellent sliding friction properties across a wide service temperature range. Klubertemp GR M greases show a neutral behaviour towards most plastics and elastomers and can therefore be used for a variety of component materials.
  • Content: 10kg bucket

Description

Buy Klubertemp GR M30 High viscosity long-term grease white 10kg hobbock Dubai UAE

 

Benefits for your application

  • Long component life
    • Over a wide service temperature range
    • In contact with aggressive media
    • WWwhere sensitive plastic materials are used

Application

  • Klubertemp GR M greases are preferably used for the lubrication of electromechanical actuators, small gears and seals where they show low breakaway torques, exceptionally low friction values as well as a reduced tendency to stickslip.This leads, for example, to lower frictional heating of elastomers subject to dynamic loads and hence longer component life.

Application note

  • For optimum lubrication results, we recommend cleaning the friction points with white spirit 180/210 followed by Kluberalfa XZ 3-1. Then blow the surfaces with clean, dry air or hot air to remove solvent residues.
  • For initial lubrication, the friction points must be clean and bright, i.e. free from oil, grease, perspiration and contamination. Klubertemp GR M greases may be applied directly or by means of brush, spatula or lubricant dispenser.

Technical specifications

 Chemical composition, type of oil  PFPE
 Lower service temperature  -60 °C / -76 °F
 Upper service temperature  200 °C / 392 °F
 Colour space  white
 Density at 20 °C  approx. 1.94 g/cm³ a
 Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM
D-445/ASTM D 7042, 40 °C
 approx. 160 mm²/s
 Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM
D-445/ASTM D 7042, 100 °C
 approx. 45 mm²/s
 Evaporation loss, ASTM D 2595 22h/204°C  <= 2 % by weight
 Texture  homogeneous

 

 

Buy Klubertemp GR M30 High viscosity long-term grease white 10kg hobbock  in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, UAE  at best Prices from Maisam Trading LLC. Ready Stock Available.

Check out our range of Kluber In Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, Saudi Arabia, Qatar, Oman, Bahrain by clicking here

 

Buy Kluber 

Downloads

Product information – Klübertemp GR M07, M30, M60

 

 

X