HomeMaisam ShopAdhesive & LubricantsKluebersynth HB 74-401 Synthetic high temperature grease 370g
Kluebersynth hb 74-401 synthetic high temperature grease 370g

Kluebersynth HB 74-401 Synthetic high temperature grease 370g

Description

  • Klübersynth HB 74-401 is a lubricating grease based on a high-quality synthetic base oil thickened with a polyurea.
  • This combination enables long-term lubrication over a wide temperature range.
  • In addition, good wear protection under high loads is achieved due to the high base oil viscosity and special additives.
Categories: , Tags: , , , , , , , , , , , , , , , , , , , , , Brand:

Description

Buy Kluebersynth HB 74-401 Synthetic high temperature grease 370g  Dubai UAE

Benefits for your application

  • Extended component life due to good wear and corrosion protection
  • Cost reduction possible due to longer relubrication intervals, even at higher temperatures, based on the synthetic grease concept
  • Type reduction possible due to the versatile usability over a wide temperature range

Application areas

  • Klübersynth HB 74-401 is primarily used in roller and plain bearings at high temperatures, e.g. in the steel or cement industry.

Possible areas of application:

  • Rollers in continuous casting plants
  • Transport roller bearings in continuous furnaces
  • Roller-roller bearings in vertical mills
  • Pinion bearing

Application Notes

  • Klübersynth HB 74-401 can be applied with a spatula, brush and grease gun or with standard central lubrication systems.
  • Ideally, before greasing with Klübersynth HB 74-401, the lubricating point should be cleaned and the old grease removed.
  • If it is not possible to clean the lubrication point for technical reasons, the grease can be replaced by more frequent relubrication in the initial period after the changeover.

Technical specifications

 Article number  004282
 Colour space  beige
 Texture  homogeneous
 Texture  fibrous
 Lower service temperature  -40 °C
 Upper service temperature  200 °C
 NLGI grade, DIN 51818  1
 Density at 20 °C  approx. 0.85 g/cm³
 Drop point, DIN ISO 2176, IP 396  >= 220 °C
Flow pressure of lubricating greases, DIN 51805, test temperature: -55 °C <= 1 400 mbar
Worked penetration, DIN ISO 2137, 25 °C, lower limit value  310 x 0.1 mm
Worked penetration, DIN ISO 2137, 25 °C, upper limit value  340 x 0.1 mm
Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C  approx. 24 mm²/s
Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C  approx. 4.6 mm²/s
Corrosion inhibiting properties of lubricating greases, DIN 51802, (SKF-EMCOR), test duration:
1 week, distilled water		 <= 1 corrosion degree
Minimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened
original container, approx.		 36 months

 

Buy  Kluebersynth HB 74-401 Synthetic high temperature grease 370g in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, UAE  at best Prices from Maisam Trading LLC. Ready Stock Available.

Check out our range of Klüber In Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, Saudi Arabia, Qatar, Oman, Bahrain by clicking here

 

Buy Klüber 

Downloads

 

 

Related products

X